An ƙera na'urar auna ƙarfin lantarki ta jerin Mag-11 don amfani da tsafta. Na'urar auna ƙarfin lantarki ta nau'in manne an yi ta ne da bakin ƙarfe, kuma kayan rufin shine FEP / PFA, wanda zai iya biyan buƙatun tsafta na rufin, wanda ake amfani da shi sosai a abinci, abin sha, magani da sauran masana'antu. Sau da yawa ana buƙatar tsaftacewa da tsaftacewa akai-akai, don a wargaza shi cikin sauƙi, gabaɗaya ana amfani da haɗin manne da bututun gwaji. Akwai ƙananan nau'ikan da ke nesa.
Siffofi
Babu wani ɓangare mai motsi kuma babu asarar matsi
Babban daidaito na ±0.5% na ƙimar karatu
An yi shi da bakin karfe mai inganci 304
Auna hanyoyin da ake bi wajen tafiyar da alkiblar gaba da ta baya.
Hanyoyi da yawa na sadarwa, kamar 4-20mA, RS485 Modbus, Pulse da Hart
Ana samun bututun DN10-80
Rufin FEP da PFA zaɓi ne na zaɓi
Zai iya auna kwararar ruwa daban-daban masu sarrafawa (gudanarwa ＞5uS/cm)
Ƙayyadewa
Mai sauya fasali:
| Allon Nuni | Nunin LCD na Turanci mai layi 4, yana nuna bayanan kwararar gaba da baya, kashi na kwarara da saurin kwarara. |
| Saitin Sigogi | Saita sigogi tare da maɓallin, na'urar sarrafawa ta nesa mai ƙarfi da Bluetooth (wayar hannu). |
| Harshe | Sinanci, Turanci; Za a iya keɓancewa da Sinanci na gargajiya, Sifaniyanci, da Koriya |
| Fitowar Yanzu | 4-20mA, Juriyar Load ≤ 500Ω(haɗa da juriyar kebul), Hart |
| PIO | Za a iya zaɓar fitowar bugun zuciya mara aiki, fitowar bugun zuciya mai aiki, fitowar fitarwa/ƙararrawa ta yanayi da shigar da siginar lamba. |
| Fitowar Pulse Mai Sauƙi: 30VDC(A kashe), 200mA(A kunne); 0.0001-5000Hz; Faɗin Pulse: Zagayen aiki 50% ko ƙimar da aka ƙayyade ( ≤100ms ) | |
| Fitowar Pulse Mai Aiki: 0.0001-2000Hz, ≤150mA, 15VDC ±20%; Faɗin bugun jini: ≤100ms (Tsarin tsoho: 20ms) | |
| Fitowar Jiha/Ƙararrawa: Ƙarfin Hulɗa: 30VDC(A kashe), 200mA(A kunne) | |
| Shigar da Saduwa: Lambobin sadarwa marasa aiki, Juriyar Load: rufe ≤ 200Ω, an cire ≥100kΩ | |
| Sadarwa | RS485 (MODBUS-RTU),BACNET, HART |
| Tushen wutan lantarki | 220VAC50Hz/60Hz,24VDC, 100-240VAC |
| Ƙararrawa | Ƙararrawar bututu mara komai, ƙararrawar baya, ƙararrawar iyaka ta sama da ta ƙasa |
| Ajin kariya | IP65, IP67 |
| Daidaito | 0.5%, 0.3%, 0.2% |
| Mai hana fashewa | Exia/db II CT3 ~ T6 Ga / Gb Ex tb III CT 200℃ Db |
| Tsarin gini | Ƙarami ko nesa |
Na'urar firikwensin:
| diamita | DN10-DN80 |
| Kayan lantarki | SS316L |
| Kayan rufi | FEP, PFA |
| Kayan harsashi | Bakin Karfe (304,316,316L) |
| Bututun ruwa mai gajere | Kayan aiki: 316L; Ma'aunin matsewa: DIN32676 ko ISO2852 |
| Matsakaicin zafin jiki | -40°C~+140°C |
| Ajin kariya | IP65, IP67, IP68 |
| Haɗi | Kayan aiki 304, ma'aunin matsewa: DIN32676, ISO2852, 3A |
| Matsakaicin matsin lamba na aiki | 1.6Mpa |
Girma
| diamita mm | Girman Jiki mm | F Diamita na waje na Chuck | ||||
| L | D | H | Farashin 32676 | ISO2852 | 3A | |
| 10 |
150 |
84 |
125.5 | 34 | 34 | 25 |
| 15 | 34 | 34 | 25 | |||
| 20 | 34 | / | / | |||
| 25 | 50.5 | 50.5 | 50.5 | |||
| 32 | 93 | 134.5 | 50.5 | 50.5 | / | |
| 40 | 99 | 140.5 | 50.5 | 50.5 | 50.5 | |
| 50 | 112 | 153.5 | 64 | 64 | 64 | |
| 65 | 200 | 125 | 166.5 | 91 | 77.5 | 77.5 |
| 80 | 137 | 178.5 | 106 | 91 | 91 | |
Zaɓin Kayan Lantarki
| Kayan Aiki | Lambar Lamba | Aikin Juriyar Tsatsa |
| 316L | V | Ana amfani da shi a cikin ruwan masana'antu, ruwan gida, najasa, maganin tsaka tsaki da kuma acid mai rauni kamar carbonic acid da acetic acid. |
| Hastelloy Alloy C | Hc | Acid mai juriya ga iskar oxygen, kamar nitric acid, gauraye acid, hadaddun acid da aka gauraya da sulfuric acid. Yana da kyakkyawan tsatsa juriya ga ruwan teku, maganin alkaline da maganin chloride. Ba a amfani da shi ga: acid hydrochloric da acid hydrofluoric |
| Hastelloy Alloy B | Hb | Yana da juriya mai kyau ga acid, gishiri, da alkaline waɗanda ba sa lalata fata. Bai dace da: nitric acid ba. |
| Ti | Ti | Suna da juriya mai kyau ga ruwan teku, chloride, hypochlorite da sauran hydroxides. Bai dace ba: rage acid kamar hydrochloric acid, sulfuric acid, hydrofluoric acid. |
| Ta | Ta | Kusan suna da juriya ga lalata ga dukkan hanyoyin sinadarai, wanda galibi ana amfani da shi don hydrochloric acid da sulfuric acid. Ba a amfani da shi ga: hydrofluoric acid, alkaline da fuming sulfuric acid. |
| Tungsten Carbide | W | Suna da juriyar lalacewa mai kyau, ana amfani da su don amfani da kayan sawa kamar su laka da ɓawon takarda, amma ba su da juriyar tsatsa. |
| Alloy na Platinum-iridium | Pt | Baya ga sinadarin ruwa da gishirin ammonium, kusan suna da juriya ga dukkan sinadarin acid, alkaline da gishiri. |
Zaɓin Kayan Rufi
1. Ga masu amfani da zafin jiki mai yawa (≥140℃), ana fifita rufin PFA.
2. Ga masu buƙatar tsafta ya kamata su zaɓi rufin FEP
3. Ga kayan da aka saka kamar su slurry da pulp, ya kamata a zaɓi rufin FEP.
4. Domin sassauƙan sassaka kamar ɓangaren takarda, fifiko ga rufin FEP ko PFA.
5. Idan akwai matsin lamba mai tsanani, ya kamata a zaɓi FEP.
| Kayan Aiki | Aikin Juriyar Tsatsa | AikiZafin jiki | Kewayon da ya dace | diamita(mm) |
| FEP | Juriyar tsatsa daidai take da PTFE. | -40 ~150℃ | Duk wani ruwa banda kayan da aka saka kamar turmi. | DN3-400 |
| PFA | Suna da juriya ga tsatsa ga dukkan sinadarai. Juriyar zafin jiki ta fi FEP kyau. | -40~180℃ | Kamar PTFE, fifikon zafin jiki mai ɗorewa. | DN3-400 |
Nisan Ma'aunin Gudawa
Dole ne a gwada kowace na'urar auna kwararar lantarki ta hanyar daidaita ainihin ma'auni kafin a bar masana'anta. Don haka lokacin da ka zaɓi kewayon aunawa, gabaɗaya kar ka karya sharadin da ke cewa "titin dole ne ya fi girma fiye da kwararar da aka auna", kuma ya fi kyau ga kewayon da ke kusa da kwararar da aka auna. Gabaɗaya, yi kwararar da aka auna a cikin kewayon 50% zuwa 80%.
Ana iya canza kewayon aunawa na na'urar auna kwararar lantarki ta Mag bisa ga ainihin yanayin.
Mafi girman gudu zai iya kaiwa mita 12/s.
| Diamita(mm)(DN) Gudun sikelin (m)3/h) | |||||||||||||||
| 10 | 0.1 | 0.16 | 0.2 | 0.25 | 0.3 | 0.4 | 0.5 | 0.6 | 0.8 | 1.0 | 1.2 | 1.6 | 2.0 | 2.5 | 2.8 |
| 15 | 0.2 | 0.4 | 0.5 | 0.6 | 0.8 | 1.0 | 1.2 | 1.6 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 6.3 |
| 20 | 0.4 | 0.6 | 0.8 | 1.0 | 1.2 | 1.6 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 8.0 | 10 | 11.3 |
| 25 | 0.6 | 1.0 | 1.2 | 1.6 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 8.0 | 10 | 12 | 16 | 17.7 |
| 32 | 0.9 | 1.6 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 8.0 | 10 | 12 | 16 | 20 | 25 | 28 |
| 40 | 1.4 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 8.0 | 10 | 12 | 16 | 20 | 25 | 30 | 40 | 45 |
| 50 | 2.1 | 4.0 | 5.0 | 6.0 | 8.0 | 10 | 12 | 16 | 20 | 25 | 30 | 40 | 50 | 60 | 70 |
| 65 | 4 | 6.0 | 8.0 | 10 | 12 | 16 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | 120 |
| 80 | 6 | 10 | 12 | 16 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | 120 | 160 | 180 |
| 100 | 8 | 16 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | 120 | 160 | 200 | 250 | 280 |
| 125 | 13 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | 120 | 160 | 200 | 250 | 300 | 400 | 440 |
| 150 | 19 | 40 | 50 | 60 | 80 | 100 | 120 | 160 | 200 | 250 | 300 | 400 | 500 | 600 | 630 |
| 200 | 34 | 60 | 80 | 100 | 120 | 160 | 200 | 250 | 300 | 400 | 500 | 600 | 800 | 1000 | 1100 |
| 250 | 53 | 100 | 120 | 160 | 200 | 250 | 300 | 400 | 500 | 600 | 800 | 1000 | 1200 | 1400 | 1600 |
| 300 | 76 | 160 | 200 | 250 | 300 | 400 | 500 | 600 | 800 | 1000 | 1200 | 1600 | 1800 | 2000 | 2500 |
Lura na 1: Yankin Bold shine kwararar da muka ba da shawarar.
Bayani na 2: Tsarin kwarara da gudu: V= 354 x F / D2(V: Sauri, m/s, F: Guduwar ruwa, m3/h, D: Diamita, mm)
