Don shigar da mitar kwararar ultrasonic na lokacin wucewa, akwai hanyoyi 4, hanyoyin V / Z / W / N.

A yanayi na yau da kullun, diamita na bututun shigarwa a cikin kewayon DN15-200mm za a iya fifita shi ta hanyar V, ana iya amfani da hanyar V lokacin da ba a gano siginar ba ko kuma ingancin siginar bai yi kyau ba, kuma ya kamata a fifita hanyar Z lokacin da diamita na bututun ya wuce DN200mm ko ma'aunin bututun ƙarfe. Hanyar N da hanyar W ba su da amfani sosai, waɗanda suka dace da shigar da bututun siriri a ƙarƙashin DN50mm.

Hanyar V hanya ce ta shigarwa ta yau da kullun, wadda ta fi dacewa a yi amfani da ita kuma daidai gwargwado. Lokacin shigarwa, ana daidaita na'urori masu auna firikwensin guda biyu a kwance, kuma layin tsakiya yana kwance tare da ma'aunin bututu. Ana iya auna kewayon diamita na bututun shine DN15mm-DN400mm.

Shigar da hanyar N Shigar da hanyar N yana da alaƙa da faɗaɗa nisan watsawa ta ultrasonic don inganta daidaiton ma'auni. Lokacin da aka yi amfani da hanyar N don shigarwa, hasken ultrasonic yana haskaka sau biyu a cikin bututun kuma yana ratsa ruwan sau uku (wanda ake kira hanya uku), wanda ya dace da auna bututun ƙananan diamita.

Kamar yadda aka shigar da hanyar N, shigar da hanyar W kuma yana inganta daidaiton auna ƙaramin diamita na bututu ta hanyar faɗaɗa nisan watsawa ta ultrasonic. Hanyar W ta dace da auna ƙananan bututun da ke ƙasa da 50mm. Lokacin da aka shigar da ita ta amfani da hanyar W, hasken ultrasonic yana bayyana a cikin bututun sau uku kuma yana ratsa ruwan sau huɗu.