Haɗin Zaren Mag-11 Series Mai auna kwararar lantarki shine mai auna sanyi, zafi, wanda aka fi sani da mitar makamashin lantarki ko mitar zafi ta lantarki. Ana amfani da shi a cikin madaurin musayar zafi, yana auna kuzarin da ruwan mai ɗaukar zafi ke sha ko canza shi. Mai auna kuzari yana nuna zafi tare da sashin aunawa na doka (kWh), ba wai kawai auna ƙarfin dumama na tsarin dumama ba, har ma da auna ƙarfin shaƙar zafi na tsarin sanyaya.
Mita kwararar Mag-11 Series ta ƙunshi na'urar auna kwarara (firikwensin kwarara), na'urar lissafin makamashi (mai juyawa) da kuma na'urori masu auna zafin jiki guda biyu masu daidai (PT1000).
Siffofi
Babu wani ɓangare mai motsi kuma babu asarar matsi
Babban daidaito na ±0.5% na ƙimar karatu
Ya dace da maganin ruwa da ruwa/Glycol, ana iya tsara ƙarfin zafi
Auna hanyoyin da ake bi wajen tafiyar da alkiblar gaba da ta baya.
4-20mA, Pulse, RS485, Bluetooth da BACnet fitarwa na iya zama zaɓi.
Ana samun bututun DN10-40.
Na'urori masu auna zafin jiki na PT1000 guda biyu
Mai adana bayanai na tazara a ciki.
Ƙayyadewa
Mai sauya fasali:
| Allon Nuni | Nunin LCD na Turanci mai layi 4, yana nuna bayanai na kwararar gaggawa, kwararar tarin bayanai, zafi (sanyi), zafin ruwan shiga da fitar da bayanai. |
| Fitowar Yanzu | 4-20mA (zai iya saita kwarara ko makamashi) |
| Fitar da bugun jini | Za a iya zaɓar cikakken mita ko bugun daidai, matsakaicin ƙimar mitar fitarwa shine 5kHz. |
| Sadarwa | RS485 (MODBUS ko BACNET) |
| Tushen wutan lantarki | 220VAC, 24VDC, 100-240VAC |
| Zafin jiki | -20℃~60℃ |
| Danshi | 5%-95% |
| Matakin Kariya | IP65 (Na'urar firikwensin na iya zama IP67, IP68) |
| Tsarin gini | Haɗaka ko raba |
| Girma | Ma'aunin tunani na MAG-11 Converter |
Na'urar firikwensin:
| diamita | DN10 - DN40 |
| Kayan lantarki | SS316L, Hastelloy Alloy C |
| Kayan rufi | FEP, PFA |
| Zafin jiki | 0 ~ 180℃ |
| Matakin Kariya | IP65, IP67, IP68 |
| Haɗi | Nau'in zare |
| Matsi | 1.6Mpa (daidaitacce); 1.0Mpa (zaɓi ne) |
| Na'urar firikwensin zafin jiki | PT1000 |
Girma:
| diamita | D | L | L1 | L2 | D1 | L3 | D3 |
| DN10 | G 3/4 B | 110 | 50 | 15 | R 1/4 | 28 | 13.5 |
| DN15 | R 1/2 | 30 | 20.4 | ||||
| DN20 | G 1B | 123 | 58 | R 3/4 | 33 | 26.2 | |
| DN25 | G 1 1/4B | 128 | 60 | 18 | R 1 | 35 | 33.2 |
| DN32 | G 1 3/4B | 133 | 68 | 20 | R 1 1/4 | 38 | 41.7 |
| DN40 |
Nisan Aunawa:
| Girman bututu | Haɗi | Nisan aunawa | ||
| Qp (m3/h) | Qi (m3/h) | |||
| FEP/PU | PTFE | |||
| DN10 | Zaren Zare | 2.5 | 0.06 |
|
| DN15 | 6 | 0.15 | 0.3 | |
| DN20 | 10 | 0.25 | 0.5 | |
| DN25 | 16 | 0.4/0.8 | 0.8 | |
| DN32 | 25 | 0.6 | 1.2 | |
| DN40 | 40 | 1 | 2 | |
Zaɓin Kayan Eletrode
| Kayan Aiki | Lambar Lamba | Aikin Juriyar Tsatsa |
| 316L | V | Ana amfani da shi a cikin ruwan masana'antu, ruwan gida, najasa, maganin tsaka tsaki da kuma acid mai rauni kamar carbonic acid da acetic acid. |
| Hastelloy Alloy C | Hc | Acid mai juriya ga iskar oxygen, kamar nitric acid, gauraye acid, hadaddun acid da aka gauraya da sulfuric acid. Yana da kyakkyawan tsatsa juriya ga ruwan teku, maganin alkaline da maganin chloride. Ba a amfani da shi ga: acid hydrochloric da acid hydrofluoric |
| Hastelloy Alloy B | Hb | Yana da juriya mai kyau ga acid, gishiri, da alkaline waɗanda ba sa lalata fata. Bai dace da: nitric acid ba. |
| Ti | Ti | Suna da juriya mai kyau ga ruwan teku, chloride, hypochlorite da sauran hydroxides. Bai dace ba: rage acid kamar hydrochloric acid, sulfuric acid, hydrofluoric acid. |
| Ta | Ta | Kusan suna da juriya ga lalata ga dukkan hanyoyin sinadarai, wanda galibi ana amfani da shi don hydrochloric acid da sulfuric acid. Ba a amfani da shi ga: hydrofluoric acid, alkaline da fuming sulfuric acid. |
| Tungsten Carbide | W | Suna da juriyar lalacewa mai kyau, ana amfani da su don amfani da kayan sawa kamar su laka da ɓawon takarda, amma ba su da juriyar tsatsa. |
| Alloy na Platinum-iridium | Pt | Baya ga sinadarin ruwa da gishirin ammonium, kusan suna da juriya ga dukkan sinadarin acid, alkaline da gishiri. |
Zaɓin Kayan Rufi
1. Don yanayin zafi mai yawa (≥140℃), fifiko ga rufin PFA
2. Ga masu buƙatar tsafta ya kamata su zaɓi layin FEP (ko PTFE)
3. Ga masu saka kayan daki kamar su slurry da pulp, ya kamata su zaɓi layin PU ko FEP.
4. Domin sassauƙan sassaka kamar ɓangaren takarda, fifiko ga rufin FEP ko PFA.
5. Idan akwai matsin lamba mai tsanani, ya kamata a zaɓi FEP.
| Kayan Aiki | Aikin Juriyar Tsatsa | Zafin Aiki | Kewayon da ya dace | Diamita (mm) |
| PTFE | Kusan suna da juriya ga tsatsa ga dukkan hanyoyin sinadarai. | -40 ~150℃ | Duk wani abu banda ruwa a cikin bututun matsin lamba mara kyau da kuma ruwan yana da juriya mai kyau ga lalacewa. | DN15-1200 |
| Ne | Suna da juriya ga ƙarancin daidaiton acid, alkali da gishiri, banda mai. | -30~80℃ | Ruwan masana'antu, najasa, ƙarancin daidaiton acid, maganin alkaline da gishiri. | DN50-2000 |
| GFNE | Suna da juriya ga lalatawa ga ƙarancin daidaiton acid, alkali da gishiri; suna da juriya ga zafin jiki mai yawa da matsin lamba mara kyau. | -25~160℃ | Ruwan masana'antu, najasa, ruwan zafi, ƙarancin daidaiton acid, maganin alkali da gishiri. | DN50-2000 |
| PU | Suna da juriya mai kyau ga lalacewa, ana amfani da su don saka slurry, amma ba su da juriya ga lalata. | -30~80℃ | Ruwa mai ɗauke da hatsi masu tauri (groat, slurry) | DN15-400 |
| FEP | Juriyar tsatsa daidai take da PTFE. | -40 ~150℃ | Duk wani ruwa banda kayan da aka saka kamar turmi. | DN3-400 |
| PFA | Suna da juriya ga tsatsa ga dukkan sinadarai. Juriyar zafin jiki ta fi FEP kyau. | -40~180℃ | Kamar PTFE, fifikon zafin jiki mai ɗorewa. | DN3-400 |
