Domin mu TF1100-CH na hannu kwarara mita, da shigarwa kamar yadda ya biyo baya.
Lokacin amfani da hanyar V ko W don shigar da transducers, shigar da transducers biyu a gefen bututun.
1. Haɗa sarƙoƙi da bazara.
2. Kwanta a kan isasshen couplant akan transducer.
3. Haɗa kebul na transducers.
4. Shigar da sigogin aikace-aikacen a cikin watsawa don samun tazarar XDCR a menu na 25.
5. Shigar da gyara masu juyawa akan mai mulki ta amfani da screws.
6. Gyara masu juyawa ta amfani da sarƙoƙi da maɓuɓɓugan ruwa.
7. Kusa da masu juyawa zuwa bututu ta hanyar daidaita dunƙule dunƙule har sai an danna mai jujjuyawa a kan bututun.
Matakan Shigarwa don Hanyar Haɗuwa na Z da N Transducer
Lokacin amfani da hanyar Z ko N don shigar da transducers, shigar da transducers biyu bi da bi a kishiyar bututun mai.Matakan shigarwa iri ɗaya ne da na W da V transducer hanyar hawa ba tare da mai mulki ba.
Lokacin da aka gama shigarwa, zai nuna kamar haka:
Bayanan kula:
1. Daidai gwargwado a yada couplant a gefen aunawa na transducer, sa'an nan kuma sanya transducer a cikin bracket daga wideside, tabbatar da bututu da transducer suna da haɗin gwiwa mai kyau.
2. Kada a wuce gona da iri don hana extrusion coupplant.
3. Tabbatar cewa ɓangarorin biyu suna kan saman axial iri ɗaya.
Lokacin aikawa: Maris 22-2022